Can Günaydın.Burada anlatmak istedi

Can Günaydın.
Burada anlatmak istediğim,
Debi (Q=l/d) Pompanın belirli bir devirde, bir dakada vermiş olduğu yağ miktarıdır.
Deplasman ise pompanın bir turda vermiş olduğu yağ miktarıdır.
Verilen şekle göre sevo pistonun küçük olan yüzeyine pompa basıncı etkin olursa pompanın (verdi) debisi artar. Yani pompa örnek olarak 1500 d/d dönüyorsa hidrolik sisteme fazla yağ gönderir.
Makine yüke girdiğinde sistem basıncıda pompa regülasyon değerini geçerse regülatör içerisindeki yön kontrol valfi aynı pompa yağını gene 1500 d/d da bu sefer servo pistonun büyük yüzeyine göndererek pompa debisini kısmaya başlar.
N=P.Q /600.μm = KW

Результаты (английский) 2:

Can Good morning.
Here I want to tell,
flow rate (Q = l / d) pump at a certain speed, a Dakai have given in which the amount of fat.
Displacement is the amount of fat to be given a tour of the pump.
The pump If the surface of the pump pressure, the smaller the SeVo piston According to the shape of the active (gave) increased flow. So the pump sample 1500 d / d is turning sends hydraulic system more oil.
When the machine load system directional control valve to the same pump oil in the regulator exceeds the value of the pump regulating the pressure again 1500 d / d at this time begins to throttle the pump flow by sending large surface of the servo piston.
N = PQ /600.μm = KW

Результаты (английский) 3:

Can Good Morning.
here I want to tell it,
flow (Q=l/d) at a given pump, as provided by a dakada.
amount of oil pump away if it is in a given amount of oil as it is.
The sevo as shown in the diagram of the small surface of the pump, the pump pressure is active (he) flow rate is increased. As an example, i.e. pump 1500 d/d If more oil to the hydraulic system.
When machine load system basıncıda pump regulation regulator if it exceeds the directional control valve is pump oil still 1500 rpm servo piston in this time by sending large surface of pump flow rate will reduce.
N=P. Q /600.μm = KW